First of all: to see what part of the FRP tank is leaking? General glass and steel water tank where the main areas are mainly concentrated in: sheet, sheet and plate seams, four horns and plugging Department.
Specific analysis of the four cases?
First, if the plate cracks leaking, the seam is very small, you can use sealant or water does not leak in the tank internal repair, the method is: to put the water finished, dried, sealant or water does not leak to the leaky parts can. If it is a large plate cracks, indicating the quality of the plate problems, which is looking for manufacturers to replace or return;
Second, if the sheet and the sheet at the seams at the water leakage, indicating that the middle of the tape is not clamped or no bolt tightening, repair method is tight about bolts (tight one);
Third, if the four horns and plugging at the water, that the tape did not put away or plug the direction of dislocation, repair method is to plug out, and then put some strips, re-installed on it.
Fourth, if it is winter, you have to look at the glass water tank will not be leaking due to ice. FRP tank in the normal use of the case is not frozen, it is because: glass steel tank water, you every day In the use, update, and glass fiber reinforced plastic tank is insulated, you add water to the water tank every day, the temperature of the tank or more than 25 `C, because the solar heat pipe hot water you can not use, even if you put the water tank Run out, its water temperature is still higher than the cold water to join, but there is another situation, that is, for a long time without, the weather is very cold, the water tank is not much, it is possible to freeze.
This situation is relatively small. But it is not no. So, ah, in this to remind you that the winter glass water tank water, to frequent replacement, so as not to crack.
If there’s a problem with the tank Please Corresponding inspection.