Inbuilt water storage is changing into increasingly more widespread, so we’ve developed just a few different tanks (poly and stainless out there) that we build into our drawer methods so that you get the convenience of easy accessibility water while maintaining the neat fashionable end of a Drifta set-up. The tanks are fitted in behind the drawers so out of sight and protected from damage…and this additionally means they’re completely no further work to install as they’re already fitted onto the drawer unit when it leaves the factory!
We have an important selection of equipment to go with our 4WD Drawers /p>
fridge slides / sliding prime, tie down factors, water tanks, cargo obstacles, aluminium
edging, insert drawers, swap drawers, lock box, mattress extension and more.
click on here for more particulars
Observe including a tank might affect the height of the drawer unit please test this with Mark when enquiring / ordering
35L poly tank & hose kit$370
40L stainless steel tank & hose kit$795
Area is optimum in any 4WD so with the wagons I match the tanks in between the drawers and the seats the tanks are tapered to match the angle of the seats so make full use of that area, and keep the weight central between the axles of your truck. You lose approx 100mm off the size of the drawers, but the table suits in above the tank so its still a full size table. The filler and outlet are accessible via the passenger side rear door, and the tanks have a transparent hose gauge on the side so you can easily regulate the water stage!
Dual CAB Fashion
55L poly tank & hose kit$395
50L stainless steel tank & hose kit$795
70L stainless steel tank & hose kit$895
Most dual cab tubs are near 1500mm long, so to lose approx 250mm off the size of the drawers to hold some water is a small sacrifice. The tanks are built into the drawer unit up against the cab which is the best spot to carry water it retains the burden between the axles and is completely protected and out of sight. The filler is normally accessible via the aspect window of the canopy, then the outlet pipe reaches out by the tailgate.
#gallery-2 margin: auto; #gallery-2 .gallery-merchandise float: left; margin-high: 10px; textual content-align: center; width: 50%; #gallery-2 img border: 2px strong #cfcfcf; #gallery-2 .gallery-caption margin-left: 0; /* see gallery_shortcode() in wp-consists of/media.php */
Contact me (Beechy) for extra details customized set-ups email@example.com
Beechy (mark) is our supervisor for all of the 4wd drawers.. he handles all our enquiries, and all the construction and fitting. Much of our work is barely customized made, or some majorly so. It’s amazing how many different sets / mixtures of drawers we construct every week.. there may be just about nothing Beechy can’t work out for you, in order for you one thing custom madei’ve been extraordinarily lucky to find Beechy, who’s as obsessed with our Drifta products as i’m.. so, any enquires, questions and so on, just send him and e-mail, or give him a callthanks in your time, rgds luke
Cellphone: (02) 6558 2328 (BH)
7 Lowe St Gloucester NSW 2422