There are many types of industrial water tanks, different types have different uses, the existence of water for life, but under normal circumstances to provide only installed industrial water can also be installed other, but it should be noted that can be loaded with some and acidic A large amount of liquid, such as hydrochloric acid, sulfuric acid, these are not.
Some people will habitually put some debris at the top of the tank, but these are not good, according to the different capacity can be divided into different products, and different products will be used in different aspects of the tank, so the customer According to the actual need to select the corresponding product, the installation and use of the tank when there are some issues needing attention
Main technical requirements and operating procedures of industrial water tanks
1, the water tank should meet the basic standard installation requirements, according to the provisions of the design requirements and size of installation, or in accordance with user needs for construction.
2, the tank around the top and all the manhole must be welded, and the flat floor should be maintained at a certain tilt.
3, after the water tank welding, each firmware can not have a loose place, the connection parts shall not be welded is not solid, not omission phenomenon.
4, the bottom of the tank must be tight welding, while trying to keep the level of welding, at least not more than 15 degrees tilt.