Langtai water stortage tank mainly produce the FRP/GRP water tank, Galvanized steel water tank, Stailesss steel water tank etc. We can OEM many sizes of the water tank according to your demands.
Please see how to build the steel base(I beam) about FRP/GRP/SMC water tankÂ
The Steel base should choose the open ground according to the water tank’s size (Length*Width*Height).
Build the steel base (I beam)Â like the following,
Make sure the steel plate is horizontal(error is less than +/-0.5cm), fix 7pcs I beam on steel plate by bolts.
Weld the channel base(red color in drawing).
Every two channels distance from center to center is 1000mm or 500mm. Firstly weld the C-channel Steel as a rectangle frame which the frame size is 5970mm*4570mm, and then weld the inner C-channel steel in order to make it to be a grid which the grid size is 1000*1000mmÂ or 1000*500mm from center to center (Note: the inner C-channel opening is same direction outward when welding grid, and C-channel opening is outward in 4 direction when welding the frame). Please make sure the channel surface is plain and welding point is smooth. After finish welding C-Channel steel base, please put it on the steel baseÂ (I beam).
According to the step, you can know how to build the steel base.Â