No matter which material water storage tank (FRP/GRP water tank, Stainless steel water tank or Galvanized water tank), it needs to build the concrete foundation first. We will tell you how to build the water tank concrete foundation ?
FRP/GRP water tank Stainless steel water tank
Galvanized water tank
Now Generally when we are installing the water tanks, it needs to build the concrete foundation. In this way, it not only can reduce the cost of installation materials, but also can increase the service life of the tank. For the base of the water tank , according to different use site conditions choose different structural basis. Generally, at present there are two different ways to build the concrete foundation. Please see the following ways.
- Plane foundation
Build the flat foundation can make the largest bearing area, the bottom of the tank evenly, this way should be preferred. The foundation should be reinforced concrete structure, the surface wipe light. The foundation should be wide out of the tank diameter of 150 or so is appropriate height 100-150mm . The central point of the foundation is preferably located in the center of the building.
A single beam width standard is 24cm; (because each brick width is 24cm). And there is a single beam width: Design Institute standards is 1m. According to many years experience in installation, the beam width 500mm is the best choice.
The following is a plan view of the tank installation base.
Welcome to contact with us. Email: firstname.lastname@example.org.